Caring for BioGS
- How often should you clean or replace your filters?
- How do I clean the air quality sensor?
- Please tell me how to clean the air inlet and outlet.
- Please tell me how to clean the surface of the main unit and the front panel.
- Please tell me how to clean the pre-filter.
- How do I clean the BioGS HEPA filter?
- Please tell me how to clean the super activated carbon filter.
- How do I reset the filter cleaning/replacement indicator?
Download
BioGS air purifier maintenance video
How often should the filter be cleaned or replaced?
| filter | Exchange | Cleaning |
|---|---|---|
| Prefilter | No need to replace, can be washed with water | every month |
| BioGS HEPA filter | 1.5 years ~ 3 years ※ | every three months |
| Super activated carbon filter | 1.5 years ~ 3 years ※ | every three months |
* 1.5 years: For 24/7 operation
* 3 years: When operating 12 hours a day
How do I clean the air quality sensor?
Clean the air quality sensor every 6 months or when needed
- Open the air quality sensor cover (located on the right side of the unit)
- Clean the lens, dust inlet and dust outlet with a wet cotton swab let dry well
Please tell me how to clean the air inlet and outlet.
Clean the air inlet and outlet with a dry cloth or soft brush Use a damp cloth if necessary
*Do not use commercial detergentsPlease tell me how to clean the surface of the main unit and the front panel.
- Remove the front panel and use a dry cloth or soft brush to remove any dust accumulated on the front and back of the panel. Remove stubborn stains with a damp cloth if necessary *Do not use commercial detergents
- Wipe the surface of the air purifier with a clean, dry cloth
Please tell me how to clean the pre-filter.
Vacuum :
- Remove the front panel from the air purifier
- Use a handheld vacuum cleaner with a nozzle or brush attached to a low speed to remove dust from the pre-filter.
Wash with water :
- Remove the pre-filter from the main unit
- Put the pre-filter in a basin filled with lukewarm water and wash it gently for 2-3 minutes until it becomes clean.
- Rinse the pre-filter with water
- Wipe off excess water from the pre-filter with a towel
- Leave the prefilter to dry for 12-24 hours
- After it is completely dry, put the pre-filter back into the air purifier.
*Do not use commercial detergents
How do I clean the BioGS HEPA filter?
Use a handheld vacuum with a nozzle or brush on low speed to remove dust from the HEPA filter.
*Note: HEPA filters are not washable
Use a handheld vacuum cleaner with a nozzle or brush set to low speed to remove any dust stuck to the Super Activated Carbon Filter.
*Note: The Super Activated Carbon Filter cannot be washed with water.
How do I reset the filter cleaning/replacement indicator?
Filter reset buttonAfter cleaning the filter, press the reset button to turn off the filter maintenance/replacement light The filter life lights will continue to go out one by one as time passes
HEPA filters and his Super Activated Carbon Filters are recommended to be replaced every 18 months After replacing the filter, press and hold the reset button for 5 seconds to reset the filter life indicator